Fountains for Wedding Cakes

Professional quality lighted fountains look spectacular with every tiered cake design!
HOME-MENU
BRIDAL ITEMS | Replacement Parts | TROUBLE SHOOTING
Upon arrival, please examine for damages/defects which may have occurred during transit. Report must be made in writing within 24 hours or request will be VOID. Refer to Damaged/Defective Products for details

NOTICE: Fountains on this page may be drop shipped from the manufacturer and will require your signature as proof of delivery.

DRESS-UPS FOR YOUR CAKE FOUNTAIN

Non-Decorated FOUNTAINS & Stands
Click pictures to enlarge

battery casing can be purchased at a hardware store

Non-Decorated FANTASY FOUNTAINS
12 inch bowl with drip tiers, electric base. Add floral decorations, candles, etc. or stand alone under decorated cake.

NOTICE: These fountains may be drop shipped from the manufacturer and will require your signature as proof of delivery. Be sure to track for delivery and have someone there to sign. If it cannot be delivered, it will be returned to us and you will not be reimbursed for your shipping cost.

Fantasy Fountain with electric base 10 x 10 x 8-1/2 #F2 $190.00	Fantasy Fountain with electric base 10 x 10 x 12 #F3 $221.00	Fantasy Fountain with electric base 10 x 10 x 8 1/2" #F4 $190.00	Fantasy Fountain with electric base 10 x 10 x 8 1/2" #F5 $190.00
Fantasy Water Fountain with Electric Base 10-1/2 x 7-1/2" #F7 $175.95	Fantasy Water Fountain with Electric Base, includes candle stand 10-1/2 x 7-1/2" #F7H $195.95	Fantasy Water Fountain with Electric Base, 12 x 7-1/2" #F8 $123.95	Fantasy Water Fountain with Electric Base #F10 $123.95
Battery Operated Flowing Fantasy Fountain, all colors, 12 x 9-1/2" #F27 $95.95 SPECIAL ORDER allow 10-15 extra shipping days	3-Tier Drip Disk Fountain Lighted electric base. Rotar propelled. Made in Taiwan. Replacement parts sold separately 11" H #86101470 $69.95		Fantasy Fountain square with electric base 10 1/2 x 7 1/2" ORNAMENT - candles and silk flowers sold separately #F6 $190.00

Water Fountains for Cake Decorating
Replacement Parts| TROUBLE SHOOTING
Including tiers and instructions. Water cascades from all tier levels, remove top levels for smaller arrangements. Can be used with 14 in. or larger plates and 13 in. or taller pillars. Plastic clear bowl is 12 inch diameter. NOT recommended for champagne. Use distilled water for lasting workability. Clean after each use with soft cloth and remove piston/rotar. 110-250 Volt, pumps water electrically, AC motor with 28 to 65 in. cord. Dress-up around base to help bring out the bridal colors. Use liquid food color to color water BUT tiers will become discolored/stained; bleach clear.

Elegance® Revolving Oil Fountain

Mineral oil drip.
couples sold separately
Mineral oil provided)
110/120v electrical outlet (provided).

A Display Forever After!

.Use the Elegance® Revolving Oil Fountain as a center piece or as a base for cakes above or between separations. Use 14" tall pillars & 18" plates. Simply slip in 3" or 4" your figurine, fill the inside with mineral oil, plug in and turn it on. Mineral oil will drip down the fine wires while the couple turns.
.
To use the Elegance® Revolving Oil Fountain as a center piece: Add floral bouquets around the base as well as over the top. Or drape satin cloth around the base with only a floral bouquet above. How pretty this would be with feather leaf fern draping down from a beautiful floral arrangement sitting on top.
.
To use the Elegance® Revolving Oil Fountain as a base for cakes: Center a 12 inch or smaller cake on a cake drum board above the Elegance® Revolving Oil Fountain. Secure with tacky clay. Pillar up other layers accordingly. Drape a floral bouquet around the base or cover with satin cloth.
.
To use the Elegance® Revolving Oil Fountain between layers: Well out the lower cake to fit the base of the Elegance® Revolving Oil Fountain. Center a 12 inch or smaller cake on a cake drum board above. Secure with tacky clay. Pillar up other layers accordingly. 14 inch pillars and 18" plates may also be used with the Elegance® Revolving Oil Fountain between.

FOUNTAIN PARTS
There are TWO types of water fountains: a piston driven or a rotar impeller.
These fountains different greatly.
Parts are NOT interchangeable.
Make sure you know which one you have BEFORE ordering parts!
HOW TO USE

Piston Driven Fountains: NOTE: All parts for rotor fountains are sold out and no longer made or available.

Pump #306-1002 $56.00	PISTON color may vary remove between uses #20-111 $3.99	Bottom Base 4-3/4 in tapered up to 7-1/4 inch #306-1170 $15.49	Pump/Bulb Bracket for the Kolor-Flo Fountain #306-1037 $3.99
Light Socket for the Kolor-Flo Fountain #306-1045 $5.99	Light Bulb #306-1053 $6.99	Cascade Connector #20-105 $3.99
Rubber feet 3 pc #20-115 $2.29	Upper Cascade 2-1/2 inch #306-1118 $7.99	Middle Cascade 4 inch #306-1126 $9.49	Lower Cascade 5-1/2 inch #306-1134 $11.49
Kolor-Flo Fountain Bowl CLEAR for the Kolor-Flo Fountain only. Includes hole for float #20-112 $17.99	Kolor-Flo Fountain Bowl PINK bowl for Color-Flo Fountain 1 left $25.00	Clear Bowl for Piston Fountains #TE-551 $15.99
	.	.	.

* You must drop items above into your shopping cart before going any further, if you wish to purchase them.

ROTOR type Fountains
PARTS PICTURE

Rotor Pump #29-225/20-237 $19.99		light bulb style may vary #29-220/20-236 $1.99	Water intake base tier connector 2 piece set #20-232 $2.79
water intake ring only #20-230 $1.39	Upper cascade 2-1/2 inch #TE-552 $3.99	Middle cascade 4 inch #TE-553 $4.99	Lower cascade 5-1/2 inch #TE-554 $5.99
Cascade Tier SET includes 2-1/2, 4, and 5-1/2 inch clear tiers #306-1791 $10.99	Cascade Connector (clear) 3 are necessary to hold all 3 cascade tiers #20-228 $.89 each The clear cascade connector (small end up) goes inside the lower cascade 5-1/2" tier. Then another clear cascade connector to hold the middle cascade 4 inch tier. Then a third clear cascade connector to hold the upper cascade 2-1/2 inch tier. This all fits on the white water intake connector.	Clear bowl #TE-551 $15.99	.

* You must drop items above into your shopping cart before going any further, if you wish to purchase them.

FOUNTAIN NOT WORKING, TRY THIS:

Things to check:

1. Light bulbs will jar loose during shipping and/or handling. Make sure that bulbs are snugly screwed in.

2. Pistons/Rotors may stick on first, second or prolonged use. Always take piston/rotor out and check for cracks, separation, or

discoloration. Store piston/rotor in dry location. If calcium deposits accumulate clean with calcium remover cleaner.

3. Check electrical outlets for grounds; this will cause fountain to shock you.

4. Check extra extensions cords for problems; this will cause fountain to falter.

5. Make sure that all parts that hold fountain bowl on to base are securely fastened; this may cause fountain to falter.

6. Always dry fountain in inverted position.

tiers.

Prices are subject to change without notice, Sugarcraft, Inc. (c)