.

Cake by Michelle Pack

WAFER PAPER TURKEY FEATHERS

I SEND PATTERNS TO YOU AND YOU PRINT
ALSO SEE: BUTTERFLIES - LEAVES
Back to HOME - FOOD PRODUCTS
I will send one pattern of each chosen. Then you will need wafer paper to print them on. This can be run through a regular printer. I used food coloring in cartridges. But you can use real ink. Ink is not food of course. But it isn't toxic. You put such a small amount of it on the wafer paper that it woldn't harm people to eat it.
 
click enlarge
TURKEY FEATHERS PATTERNS $2.00 per sheet 
Print these on wafer paper using your own printer.
These are all slightly different sizes/lengths. All go with the same turkey style. 
Instructions below
For you to print on large frosting sheets using edible ink in a large format printer.
You will need to scan these patterns into your computer then print.
 Quantity
#01 Largest Feathers
#02 Large Feathers
#03 Large Feathers
#04 Medium Large Feathers
#05 Medium Small Feathers
#06 Small Feathers
#07 Mini Feathers
INSTRUCTIONS
 NOTE: If you wish to send me JPG's of dif. sizes or colors of feathers, please do so. But keep in mind that the wafer paper is 8x11" only. 
*You must drop items above into your shopping cart before going any further, if you wish to purchase them.
OTHER ITEMS NEEDED FOR CREATING THESE REALISTIC FEATHERS
 Quantity
16 ounce CLEAR PIPING GEL same as Wilton® #76-2011 $5.59 spread very thinly over the sheet, let dry overnight. Cut out feathers using fine cuticle scissors. The piping gel prevents the wafer paper from cracking while cutting.
Edible Glitter 1/4 oz. clear#78-600W $2.49 Very fine. Sprinkle over finished feathers to make it come alive.
*Above group

HOW TO MAKE WAFER PAPER TURKEY FEATHERS
Originated by Shirley Manbeck

Shirley said something about first making a mold of a feather shape out of Scuply (from craft store). (Then they won't be flat & will be better shapes). This is baked hard and is used over and over. I think she said she lays the feather in that mold and mists so she can get the shape better. This isn't needed so much if we use wafer paper pre-printed to color. Just so you know that this is another 'trick'. *You may be able to make molds using our Silicone Putty also.

TO DO:

  •  Cut out the feather shape.
  •  Mist BACK lightly with 80 proof Vodka in a spray fine bottle or microwave 5 seconds  (to soften the wafer paper). (Maybe you can use lemon extract…I don't know.)
  •  Fold in half length-wise, rough sides together. Make an indention for the quill, unfold before it dries.
  •  Use a skewer for quill in centers of largest feathers. Wrap skewer with brown floral tape 2/3 of the way up the feather. Wrap again thicker and taper off thin towards the top as needed for thickness. Be sure, when wrapping, that you hold the tape in an angle so you don't get unsightly thickness.
  •  Lay wafer paper on sculpy mold and mist top of feather. (I expect you can skip this part when pre-printed).
  •  Pat feather down, rough side up. Attach skewer to back. I think water will hold it but I made no notes for that. Lay wax paper strip over feather and weight it down so it dries straight.
  •  Dry on mold, remove. (This probably is not necessary when we have these pre-printed ones).
  •  Put between wax paper & lay a book on it so it will dry flat.

    • Skewers - You could find these in cooking stores probably.

    You will need some brown floral tape Split it lengthwise to use it so it won't get thick and built up too much unnaturally.
    I have seen her feathers and they absolutely do look very real!

    Property of Sugarcraft (TM
    Prices are subject to change without notice