HOW TO MOLD MORE THAN ONE COLOR PIECES
AND LOLLIPOPS
1) Use clean dry molds.
2) Use Squeeze bottle filled with
melted coating chocolate. (as shown above). Paint color details into mold.
Save
one color to use to fill. Let each color set up before adding another
against it.
3) Add stick if making suckers.
4) fill the mold with the last color
of coating chocolate when the painted parts are set, .
5) Tap mold gently, to release air
bubbles. Also, this will smooth-out the candy. If candy isn't smooth enough,
use brush in a gentle back and forth motion to finish smoothing. At this
time, if making lollipops, add sticks and roll to coat. Coating sticks
makes them more secure.
6) Place mold in the freezer and
leave there until candy has set-up.
7) Remove mold from freezer and
check for shiny or dull look. If ready, turn over and release candy from
mold.
HOW TO CARE FOR MOLDS
Molds are only washed when too dirty
to use. Plastic candy molds should be washed in lukewarm water. You may
use a mild dish washing liquid if necessary. Do not soak molds, nor scour
them. HOT WATER will discolor and warp molds. After washing, towel or drip
dry; store flat.